Of course, since THE SERVANT always pops up whenever you power up or reset your trusty ol' 128, there should be a way to return to the familiar "READY" mode. Pressing the RETURN key will allow you to do so.
Please note that the state of the shift keys may be significant even at this point. If you're using a DOS utility, DOS wedge or such like, the shift keys will in some cases determine the device number your utility will access. Please note, JiffyDos won't obey the shift keys, having its own special device number change command. To get back to THE SERVANT, hold down SHIFT, and press the RUN/STOP key.
SPECIAL NOTE about the SHIFT-RUN/STOP combination: Whenever you enter the servant, that key will always be set to 'BANK12:SYS32777'. You can't really change the definition of that key without having it reset every time you enter THE SERVANT. You may change this permanently by altering THE SERVANT itself. Please refer to Appendix B.
You can have the function key definitions and screen colors (and some other things) changed to suit your own preferences. Please refer to Appendix B for further details.
It may very well happen that THE SERVANTs function keys might be disabled or messed up for some reason or another. If the SHIFT-RUN/STOP combination (or another f-key of your choice) won't let you enter THE SERVANT, you can enter 'BANK12:SYS32777', and THE SERVANT will pop up. Also, you may want to press the '+' key once you're on THE SERVANT menu to re-enable the function keys. You may find it easier just pressing the reset button however.
